谁有不锈钢电解液的配方304

使用微信扫描二维码分享朋友圈，成交更快更简单！

谁有不锈钢电解液的配方304

产品名称：镜光型电解抛光液（KM0304)
产品型号 : KM0304
日产能 : 10
起订量 : 1桶/35Kg
主要功能 : 镜光型电解液，主要针电解前表面光滑，电镜光产品
镜面电解抛光，电解抛光，化学抛光，电化学抛光
详细描述

电解抛光的原理：电解抛光主要是在通过正负极的电流、电解液的同共作用下来改善金属表面的微观几何形状，降低金属表面粗糙度，从而达到工件表面光亮平整的目的。电解抛光主要的特点就是选择性的溶解，工件表面从微观上看是呈波浪曲线形的，金属表面凸出的部位得电率比凹进的部位得电率要高，所以凸出的部位会先溶解，而凹进的部位因得到的粘膜较多，得电低，所以呈钝化状态，不容易被溶解。所以电解的初期是表面理整的过程。
一、适用范围
■主要适用于无法进行机械抛光的复杂零件(波纹管、簿片、冲压件、医疗器械、首饰、门窗等)
■适合于批量多,产量大的工件加工,更节成本
■有特殊要求一定要电解抛光的工件.
■有抗腐蚀,抗指纹要求的工件
作用:能有效提高不锈钢的抗腐蚀能力,抗指纹效果、增加亮度。
适合的材料:通用适用于所有不锈铁和不锈钢.处理后表面亮色（境面效果）
二、我司特优点:
■所有不锈钢与不锈铁通用，通用性强是我司特优点。解决了传统配方上不同的材质需要不同的电解液的难题。降低企业成本和提率.
■生产，出亮程度比传统配方提高2倍以上，电解时间可提高2~8倍。
■环保。有SGS证书，符合FDA及ROHS绝不含铬酸等不环保物资，可靠的品质.
■药液稳定，不存在药水报废现象，24小时连续工作包用一年。绝不存在用几个月药水就报废或失效现象.
■节省成本，导电性非常强，比传统配方节电一半以上
■提供上门技术服务、培训。让您的工人能轻松操作。

三、使用方法:
1.根据工件加工状况先去油脱脂(可采用洗洁精+滚筒抛光清洗、白电油、天那水等或用我司“常温中性清洗剂”直接清洗)、机械抛光件先除腊（可采用我司“通用型除腊清洗剂”），冲水确保表面干净
2.建议简单酸洗(可使用2%~10%的硫酸溶液或者2%盐酸+3%硝酸溶液)，可视情省略。
3.清水(不可用污水或自然水)冲洗,冲净工件表面酸洗液。
4. 加热电解液至60-70度（不锈钢），70~80度（不锈铁），把铅板或不锈钢板挂在阴极，需电解抛光的工件用适宜的挂具固定在阳极且保持工件与阴极相对，然后调整电压在3~12伏左右，抛光0.5~5分钟取出工件，完成电解抛光工艺。电解抛光液初次使用宜选用较大的电压和电流.以使溶液达到佳状态.至电解液出现微绿色,表明已有一定量的金属离子溶入电解液中，抛光效果为佳.
5.漂水冲洗干净.
6.烘干
四、效果:
1. 电解抛光可达镜面级光泽，抛光后产品表面可达Ra0.2~0.5μ,并且使表面生产钝化层有效提升抗腐蚀能力。抛光，质量好，数分钟内可抛光至镜面状态。(佳效果8秒出光且平整)



Product Name: Mirror Electrolytic Polishing Fluid (KM0304)

Product model: KM0304

Daily capacity: 10

Initial order: 1 barrel/35Kg

Main Functions: Mirror Electrolyte, Smooth Surface of Primary Needle Electrolysis, Electron Microscope Optical Products

Mirror electropolishing, electropolishing, chemical polishing, electrochemical polishing

Detailed description



The principle of electropolishing: electropolishing is to improve the micro-geometry of metal surface and reduce the roughness of metal surface through the co-action of positive and negative current and electrolyte, so as to achieve the goal of bright and flat surface of workpiece. The main feature of electropolishing is selective dissolution. The surface of workpiece is wavy and curved from the microscopic point of view. The electricity yield of the protruding part of the metal surface is higher than that of the concave part. Therefore, the protruding part will dissolve first. The concave part is passive because of the large amount of mucous film and low electricity gain. So the initial stage of electrolysis is the process of surface finishing.

I. Scope of application

It is mainly suitable for complex parts (bellows, sheets, stamping parts, medical instruments, jewelry, doors and windows) which can not be machined and polished.

Suitable for processing workpieces with large batches and large output, more cost-saving

Electrolytic polishing of workpieces with special requirements.

Workpieces with anti-corrosion and anti-fingerprint requirements

Function: Can effectively improve the corrosion resistance of stainless steel, anti-fingerprint effect, increase brightness.

Suitable Material: General purpose for all stainless steel and stainless steel. After treatment, the surface brightness (environmental effect)

Second, our company's unique advantages:

All stainless steel and stainless steel are universal, strong versatility is our unique advantage. It solves the problem that different materials need different electrolytes in traditional formula. Reduce enterprise cost and improve efficiency.

The production efficiency is high, the brightness is more than two times higher than the traditional formula, and the electrolysis time can be increased by two to eight times.

Absolute environmental protection. Have SGS certificate, conform to FDA and ROHS absolutely do not contain chromic acid and other non-environmental materials, reliable quality assurance.

Drug solution is stable, there is no phenomenon of drug waste, 24 hours of continuous work package for one year. There is absolutely no phenomenon of discarding or invalidating medicines in a few months.

Cost-saving, highly conductive, more than half of the energy-saving than the traditional formula

Provide door-to-door technical services and training. Let your workers operate easily.



3. Use methods:

1. Degrease and degrease the workpiece first according to the processing condition (wash detergent + cylinder polishing cleaning, white electric oil, Tiannashui, etc.) or use our company's "normal temperature neutral detergent" to clean directly), mechanical polishing parts first dewax (we can use our company's "general dewaxing detergent"), flush water to ensure the surface clean.

2. Suggestions for simple pickling (2%~10% sulfuric acid solution or 2% hydrochloric acid + 3% nitric acid solution) can be omitted as appropriate.

3. Rinse with clear water (no sewage or natural water) and rinse the pickling solution on the surface of the workpiece.

4. Heating the electrolyte to 60-70 degrees (stainless steel), 70-80 degrees (stainless iron), hanging the lead plate or stainless steel plate on the cathode, fixing the workpiece that needs electrolytic polishing on the anode with a suitable hanger and keeping the workpiece relative to the cathode, then adjusting the voltage to about 3-12 volts, polishing the workpiece for 0.5-5 minutes to take out the workpiece and complete the electrolytic polishing process. For the first use of electrolytic polishing solution, a higher voltage and current should be selected to make the solution reach the optimum state. When the electrolyte appears slightly green, it shows that a certain amount of metal ions have been dissolved into the electrolyte, and the polishing effect is better.

5. Rinse with the rinse water.

6. drying

IV. Effectiveness:

1. Electrolytic polishing can achieve mirror-level gloss, the polished product surface can reach Ra0.2-0.5u, and the production of passivation layer on the surface can effectively enhance the corrosion resistance. The polishing efficiency is high and the quality is good. It can be polished to mirror state in a few minutes. (Optimum effect 8 seconds light and flat)